Nach Update "node" - Adapter können nicht mehr gelöscht bzw. hinzugefügt werden!

Hallo,
wollte "mal eben" als nicht Linux Spezialist "node" updaten (von Vers 10.24.1)

... danach

Plattformlinux
Betriebssystemlinux
Architekturarm
CPUs4Geschwindigkeit1500 MHz
ModellARMv7 Processor rev 3 (v7l)
RAM3.81 GBSystem-
Betriebszeit2 T. 22:03:04
Node.jsv16.14.0 (Empfohlene Version v14.19.0)
time1646985480710
timeOffset-60
Anzahl der Adapter400
NPM8.5.3
Datenträgergröße58.25GB
freier Festplattenspeicher22.7 GB

PUTTY:

nodejs - 12.22.10
node - 16.14.0
npm - 8.5.3


alles läuft aber....
der Versuch zusätzliche Adapter über Iobroker zu installieren endet immer mit code #25 (nicht möglich).

Dann habe ich das Tool entdeckt (vielen Dank) und es laufen lassen:
Reparatur/Upgrade #1 #2 #3 #4
.... leider schlug auch das Zurückgraden auf node14 fehl (bleibt auf Vers. 16)

Im Anhang des Debugfile.....
Ich kann mit den Errormeldungen nicht viel anfangen.......

Was ist falsch (ja ich weiss - ich habe Linux Defizite und das Upgrade auf node Vers. 16 war auch nich dolle)

Was muss ich machen um wieder Adapter installieren zu können?

Danke....

Durchgeführt......
leider keine Änderung.
Vers 16. bleibt, Adapter hinzufügen nicht möglich (siehe LOG).

LOG:

Using username "pi".

Linux raspberrypi 4.19.58-v7l+ #1245 SMP Fri Jul 12 17:31:45 BST 2019 armv7l

The programs included with the Debian GNU/Linux system are free software;

the exact distribution terms for each program are described in the

individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent

permitted by applicable law.

Last login: Fri Mar 11 08:43:23 2022 from 192.168.178.51

pi@raspberrypi:~ $ iobroker stop

pi@raspberrypi:~ $ sudo apt update -y && sudo apt upgrade -y

Get:1 http://raspbian.raspberrypi.org/raspbian buster InRelease [15.0 kB]

Get:2 http://archive.raspberrypi.org/debian buster InRelease [32.6 kB]

Hit:3 https://deb.nodesource.com/node_12.x buster InRelease

Hit:4 https://www.pivccu.de/piVCCU stable InRelease

Get:5 http://archive.raspberrypi.org/debian buster/main armhf Packages [393 kB]

Fetched 441 kB in 1s (399 kB/s)

Reading package lists... Done

Building dependency tree

Reading state information... Done

All packages are up to date.

Reading package lists... Done

Building dependency tree

Reading state information... Done

Calculating upgrade... Done

0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

pi@raspberrypi:~ $ sudo apt-get --purge remove nodejs -y

Reading package lists... Done

Building dependency tree

Reading state information... Done

The following packages will be REMOVED:

nodejs*

0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.

After this operation, 85.8 MB disk space will be freed.

(Reading database ... 129703 files and directories currently installed.)

Removing nodejs (12.22.10-deb-1nodesource1) ...

dpkg: warning: while removing nodejs, directory '/usr/lib/node_modules' not empty so not removed

Processing triggers for man-db (2.8.5-2) ...

pi@raspberrypi:~ $ sudo apt-get autoremove -y

Reading package lists... Done

Building dependency tree

Reading state information... Done

0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

pi@raspberrypi:~ $ sudo curl -sL https://deb.nodesource.com/setup_14.x | sudo bash -

## Installing the NodeSource Node.js 14.x repo...

## Populating apt-get cache...

+ apt-get update

Hit:1 http://archive.raspberrypi.org/debian buster InRelease

Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease

Hit:3 https://deb.nodesource.com/node_12.x buster InRelease

Hit:4 https://www.pivccu.de/piVCCU stable InRelease

Reading package lists... Done

## Confirming "buster" is supported...

+ curl -sLf -o /dev/null 'https://deb.nodesource.com/node_14.x/dists/buster/Release'

## Adding the NodeSource signing key to your keyring...

+ curl -s https://deb.nodesource.com/gpgkey/nodesource.gpg.key | gpg --dearmor | tee /usr/share/keyrings/nodesource.gpg >/dev/null

## Creating apt sources list file for the NodeSource Node.js 14.x repo...

+ echo 'deb [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_14.x buster main' > /etc/apt/sources.list.d/nodesource.list

+ echo 'deb-src [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_14.x buster main' >> /etc/apt/sources.list.d/nodesource.list

## Running `apt-get update` for you...

+ apt-get update

Hit:1 http://archive.raspberrypi.org/debian buster InRelease

Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease

Get:3 https://deb.nodesource.com/node_14.x buster InRelease [4,584 B]

Hit:4 https://www.pivccu.de/piVCCU stable InRelease

Get:5 https://deb.nodesource.com/node_14.x buster/main armhf Packages [782 B]

Fetched 5,366 B in 1s (5,310 B/s)

Reading package lists... Done

## Run `sudo apt-get install -y nodejs` to install Node.js 14.x and npm

## You may also need development tools to build native addons:

sudo apt-get install gcc g++ make

## To install the Yarn package manager, run:

curl -sL https://dl.yarnpkg.com/debian/pubkey.gpg | gpg --dearmor | sudo tee /usr/share/keyrings/yarnkey.gpg >/dev/null

echo "deb [signed-by=/usr/share/keyrings/yarnkey.gpg] https://dl.yarnpkg.com/debian stable main" | sudo tee /etc/apt/sources.list.d/yarn.list

sudo apt-get update && sudo apt-get install yarn

pi@raspberrypi:~ $ sudo apt-get install -y nodejs

Reading package lists... Done

Building dependency tree

Reading state information... Done

The following NEW packages will be installed:

nodejs

0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.

Need to get 23.3 MB of archives.

After this operation, 117 MB of additional disk space will be used.

Get:1 https://deb.nodesource.com/node_14.x buster/main armhf nodejs armhf 14.19.0-deb-1nodesource1 [23.3 MB]

Fetched 23.3 MB in 2s (11.3 MB/s)

Selecting previously unselected package nodejs.

(Reading database ... 124839 files and directories currently installed.)

Preparing to unpack .../nodejs_14.19.0-deb-1nodesource1_armhf.deb ...

Unpacking nodejs (14.19.0-deb-1nodesource1) ...

Setting up nodejs (14.19.0-deb-1nodesource1) ...

Processing triggers for man-db (2.8.5-2) ...

pi@raspberrypi:~ $ iobroker start

pi@raspberrypi:~ $ node -v

v16.14.0

pi@raspberrypi:~ $ nodejs -v

v14.19.0

Bin ein bisserl überfordert... =)
.... hoffe ich verstehe Dich richtig - ich weiß wirklich nicht so richtig was ich da mache!

Deshalb frage ich zur Sicherheit noch mal nach -- sorry

also:

1. iobroker stop
2. sudo apt update -y && sudo apt upgrade -y
3. sudo apt-get --purge remove nodejs -y
4. sudo apt-get autoremove -y
5. sudo curl -sL https://deb.nodesource.com/setup_14.x | sudo bash -
6. sudo apt-get uninstall -y nodejs oder sudo apt-get remove -y nodejs
7. NIX STARTEN (nodejs ist jetzt deinstalliert)

dann mit dem Tool "3" Auswahl reparieren und die "1" installieren ???????

Zitat von Elzershark

sudo apt autoremove

Danke nochmals.....
... hat super geklappt - bestehendes Node war für ein Update im falschen Verzeichnis!
Alles dreht sich wieder (glaube ich) ..... =)

VG